Description
Scapa 2517
EPR Self‐Amalgamating Tape
DESCRIPTION
Scapa 2517 is an insulating, self‐amalgamating tape based on EPR (Ethylene Propylene Rubber). Its colour is black.
APPLICATIONS
For insulation, waterproofing and protection of electrical components.
For jointing and repairing a wide range of solid dielectric power cables up to 69 kV.
PRODUCT BENEFITS
Supplied in an easy to handle and apply tape form. The product is interleaved with a disposable plastic liner.
Service temperature ‐40 to +100°C.
The tape will remove cleanly when cut, allowing it to be used as temporary insulation or protection. Excellent resistance to water and ozone.
Compatible with a wide range of rubber and plastic dielectric cable insulation. These include polyethylene,
The tape amalgamates rapidly when applied under tension to provide a void‐free homogeneous wrapping,
Excellent physical and electrical properties with a high degree of stability under conditions of use.
TECHNICAL PROPERTIES
| Technical Property | Nominal Value | Unit | Test Method |
| Volume Resistivity | 1×10¹³ | Ohm.m | ASTM D257 |
| Thickness | 0.75 | mm | ‐ |
| Tensile Strength | 3 | MPa | BS 903 |
| Elongation at Break | 900 | % | BS 903 |
| Dielectric Strength | 42 | kV/mm | ASTM D149 |
| Dielectric Loss Angle | 0.005 | ‐ | ASTM D150 |
STANDARD PRESENTATIONS
Roll Width: 19mm, 25mm, 38mm, 50mm
Roll Length: 5m & 9.1m
Packaging: Individually shrink‐wrapped rolls
Core: 38mm paper core
Branding: Scapa
RECOMMENDATIONS
Care should be taken to avoid direct contact between the tape and petroleum‐type solvents and oils. Oils may affect the electrical properties of the tape.
The rolls should be stored flat on their cut edges in the original packaging. The product must be protected from dust, heat, moisture, direct sunlight and solvent fumes. Storage temperature between +10°C and
+30°C. Under these conditions, the storage life of the tape in a temperate climate will be at least five years.
